How to Connect a Disabled iPad to WiFi?

A notification states that your iPad will be made useless if you repeatedly enter the wrong passcode when prompted to do so by the iPad Lock Screen.

Are you aware that it is possible to connect your disabled iPad to wifi?

There are a few different ways that a disabled iPad may connect to a wifi network.

Connect the device to the computer so that it may be synchronized. The Apple version of iTunes has finally been released. You have two options to resolve this issue: either enter the device into recovery mode or get a passcode from a computer that you have synced with. Make sure that you have a backup of your device before the syncing procedure is done.

Through activating the Recovery mode by default:

After pressing and holding the Home and Power buttons for five seconds, you may give iTunes a go at powering it down for you. It should be possible to choose “Connect to iTunes” as an option. You will need to connect your iPad to your computer before you can use it. After being repaired, it ought to perform just as it did when it was first purchased.

Why Should a Disabled iPad Be Connected to Wifi? To Get Back Your Access

You will not be able to use iTunes without first gaining access to its collection. From this location, you will have access to the Find My iPhone function, which will enable you to either reset your iPad device or retrieve the data stored on it.

When your iPad or iPhone is connected to WiFi and the internet, you will have the ability to effortlessly do a system restore on either device. It is hoped that this would allow the iPad and make it fully functioning once again.

How do I enable my iPhone so that it can connect to WiFi?

Even if the password has been forgotten or lost, the iPhone will still be able to connect to the internet using either its cellular data plan or its wireless network connection. Go to their website, which may be found at icloud.com. When you log in to the internet version of the app, enter your password, and remotely delete content from your iPhone, you will need to use the same Apple ID that you used to access Find My iPhone on your iPhone.

What to Do If You Can’t Remember the Password for Your iPad’s Wi-Fi Connection

The vast majority of wireless routers allow users to connect wireless devices by just pushing a button and using a connectivity function known as Wi-Fi Protected Setup. If you want to use your iPad or another device that is compatible with Wi-Fi to log in without entering a password, you will need to physically reach the wireless access point or router that you are using. When the user presses a little button located on the router or access point, the WPS technology will confirm the device. This happens when the user is presented with the request to enter the connection key.

How to Activate an iPad That Is Locked Using iTunes Connect iPad that can be unlocked via iTunes.

The first step is to restore the iPad by connecting it to iTunes and performing a factory reset.

Launch iTunes if you’re working with a Windows computer. If you’re using a Mac, launch the Finder application.
Make use of the buttons to put the iPad into Recovery Mode. The procedure is different for iPads that have Touch ID as opposed to those that have Face ID. The following steps need to be taken in order to boot the iPad:

Face ID is available on the iPad:

To turn off the phone, you need to press and hold the power button as well as the volume down button until the power off slider displays and then move it.
Keep holding down the power button while connecting the iPad to the computer with the USB cord, and continue to keep holding it down until the recovery screen shows.
When using Touch ID or the Home button on an iPad:
Perform a typical power down of the device.
While you are hooking up the device to a computer, be sure to keep your finger on the power button. Maintain the hold on the button until the screen that appears in recovery mode.
Find the device you want to use on the computer.
To establish a connection with iTunes, choose the iPad symbol located in the top left-hand corner of the user interface.
To pick the iPad in Finder, navigate to the sidebar on the Finder user interface and click on the icon for the iPad.
Choose to restore the data from the list of alternatives that appears. The iPad will be instructed to download and install the application.

iPad: How to Sign in to Wi-Fi and Get Online When a User Has Forgotten Their Password

If you have also neglected to write down the password for your WiFi router, then you will need to follow the steps outlined below in order to reconnect the disabled iPad to your wireless network and the internet.

To connect a WPS-enabled device, tap the WPS button (Not available on all routers)
If you want to find anything on the network, look for the actual equipment or ask the person in charge of the network where the router or access point is located.

• To turn on the Wi-Fi functionality, first, go to “Settings” and then hit the “Wi-Fi” option if it isn’t already turned on.
  To establish a connection, touch the name of the selected wifi signal. Choose the “Other” option and then enter in the network’s name and the kind of security it uses if a closed network is the cause of a certain signal not being shown. The iPad should stay on the screen asking for the password.
  Simply pressing the WPS button on the device will allow you to enable communication between the iPad and the wireless network or access point without the need for a password. The iPad will connect, and it and the router or access point will both remember the configuration they had previously used.
  Reboot the wireless LAN router (Works for Most Wifi Devices)

If you have the same problem and have forgotten the password for your WiFi equipment, you may also reset it. By resetting it, the WiFi gadget will regain its factory settings, and the password will be deleted along with it.

You may now connect your disabled iPad or iPhone to the Wifi device using the method described above.